Class Details
Below are the details about this event:
Class Name:
A Systematic Approach to Ground Water Capture Zone Analysis
Class Description:
Come hear the latest from EPA's Office of Research and Development (ORD) on the topic of ground water pump and treat system capture zone analysis. This seminar is intended for RCRA and CERCLA project managers and hydrogeologists and others who work on contaminated ground water sites with active pump and treat systems or sites where such systems are in the design phase. The day will consist of two sessions: a morning session from 9:00 am till 12 noon and then an afternoon session from 1:00 pm till 4:00 p.m.
The training seminar will present a systematic approach for the evaluation of capture zones generated by pump and treat systems, and will introduce the new guidance document on the topic developed by the EPA Office of Research and Development. The training will also discuss the importance of capture zone analysis during ground water remediation, particularly for sites requiring hydraulic containment. The use of "converging lines of evidence" and the iterative nature of the systematic approach will be explained. Six steps associated with this systematic approach for capture zone analysis are proposed.
These steps include the following:
The training seminar will present a systematic approach for the evaluation of capture zones generated by pump and treat systems, and will introduce the new guidance document on the topic developed by the EPA Office of Research and Development. The training will also discuss the importance of capture zone analysis during ground water remediation, particularly for sites requiring hydraulic containment. The use of "converging lines of evidence" and the iterative nature of the systematic approach will be explained. Six steps associated with this systematic approach for capture zone analysis are proposed.
These steps include the following:
- Step 1: Review site data, site conceptual model, and remedy goals
- Step 2: Define site-specific Target Capture Zone(s)
- Step 3: Interpret water levels
- Step 4: Perform appropriate calculations (flow budget calculation, capture zone width calculation and/or modeling)
- Step 5: Evaluate concentration trends at monitoring wells (and potentially tracer tests)
- Step 6: Interpret actual capture and compare to Target Capture Zone(s), assess uncertainties and data gaps
Class Status:
Completed
Class Begins:
August 02, 2007 at 09:00 AM
Class Ends:
August 02, 2007 at 04:00 PM
Class Contact:
Additional Notes:
Registration is open to Federal and State employees and EPA contractors. Registrations from outside contractors will be allowed to as space permits.
Location:
U.S. EPA - Region 6 (previous address)
1445 Ross Ave., Suite 1200
12th Fl. Conference Rm.
Dallas, TX 75202
1445 Ross Ave., Suite 1200
12th Fl. Conference Rm.
Dallas, TX 75202
Location Contact:
Hotel:
Arrangements for hotel accommodations, if needed, are the responsibility of individual participants.
Materials: